Benefits:

• An inexpensive way to regularly maintain your vehicle.
• Decrease wear and increase longevity of the engine.
• Reduce instances of unexpected failures.

  Includes:

• Engine Oil Filter
• Up to 5L of Synthetic-Blended Engine Oil

  Benefits:

• Provides protection in high RPM, hot running engines.
• Reduce engine damage on cold starts.
• Prevents sludge and varnish deposits for maximum overall performance.

  Includes:

• Engine Oil Filter Rated for Synthetic Oil
• Up to 5L of Synthetic Engine Oil

  Benefits:

• Provides protection in low RPM, hot running engines.
• An inexpensive way to regularly maintain your vehicle.
• Decrease wear and increase longevity of the engine.
• Reduce instances of unexpected failures.
• Reduce engine damage on cold starts.
• Prevents sludge and varnish deposits for maximum overall performance.

  Includes:

• Engine Oil Filter Rated for Synthetic-Blend Oil
• Up to 11L of Heavy Duty Synthetic-Blend Engine Oil

  Benefits:

• Reduce final drive gear wear and increase component longevity.
• Remove contaminates suspended in fluid(s).
• Replenish extreme pressure fluid additives.

  Includes:

• Service Front and Rear Differentials
• Drain and Re-fill Transfer Case Fluid

  Benefits:

• Reduce vehicle stopping distance.
• Remove moisture content and contaminants from brake fluid.
• Prevent corrosion in brake system hydraulic components, hoses and lines.

  Includes:

• Pressure Bleed Brake Hydraulic System

  Benefits:

• Eliminate brake drag, pulsation, shuttering or noise issues.
• Improve brake application and vehicle stopping distance.
• Reduce repair costs by reusing exsisting components.

  Includes:

• Confirming Rotor / Drum Measurements Meet Manufacturer Specifications
• Machine Component Contact Surfaces
• Clean Debris and Lubricate Brake Lining Mounting Contact Points
• Remove Corrosion Buildup on Saddle Bracket and/or Component Flange Mating Surfaces
• Resurface Brake Pad / Shoe Linings

  Benefits:

• Decrease coolant freeze point to -51c for cold Canadian climates.
• Neutralize coolant pH levels to prevent system corrosion.
• Remove unwanted system contaminates.
• Prevent engine damage by removing air pockets.

  Includes:

• Drain Engine Coolant from Cooling System
• Flush Cooling System Using Water Pressure
• Blow Out Remaining Water Using Presurized Shop Air
• Create Vaccum Using AirLift Tool and Monitor for Leaks
• Fill Cooling System with O.E.M. Engine Coolant Using AirLift

  Benefits:

• Improved power steering assist during high demand situations. (low-speed maneuvers)
• Prevent damage to power steering system components caused by contaminants in the fluid.

  Includes:

• Extract and Replace Contaminated Fluid

  Benefits:

• Swap-over to wheel assemblies with tires that are more appropriate for the current season.

  Includes:

• Seasonal change-over of wheels from previous season to current.

  Benefits:

• Prevent no-start conditions from a faulty battery, alternator or starter.
• Confirm that alternator output is within manufacturer specifications.

  Includes:

• Test Battery State of Charge and CCA.
• Starter Draw Test
• Alternator Output and Diode Test

  Benefits:

• Extend tire lifespan.

  Includes:

• Rotate tires with more tread depth to primary drive wheels.

  Benefits:

• Decrease wear and increase longevity of the transfer case or either differential.
• Prevent build-up of contaminants in the fluid.
• Replenish essential fluid additives.

  Includes:

• Drain and Re-Fill Fluid
• Inspect Magnet for Metallic Build-Up

  Benefits:

• Decrease wear and increase longevity of the transmission.
• Prevent build-up of contaminants in the fluid.
• Replenish essential fluid additives.

  Includes:

• Drain and Re-Fill Transmission Fluid
• Inspect Magnet for Metallic Build-Up

  *DOES NOT include full capacity due to transmission design.
  *Multiple services may be required.

  Benefits:

• Increased fuel economy.
• Decreased tire wear.
• Improved vehicle stability.

  Includes:

• 4-Wheel Computerized Alignment w/John Bean Optical Aligner
• Vehicle Road Test

  *Other modifications extra.

  Benefits:

• Reduce tire imbalance vibrations.
• Improve vehicle stability at highway speeds.

  Includes:

• Four Tire Wheel Balance
• Wheel Weights

• Battery Testing
• Brake Inspection
• Cooling System Inspection
• Drive Belt Inspection / Replacement
• Driveline Inspection
• Engine Air Filter Replacement
• Exhaust System Inspection
• Exterior / Interior Bulb Replacement
• Fault Code Scans
• Fluid Inspection / Top-up
• Fuel Filter Replacement
• Steering and Suspension Inspection
• Timing Belt Replacement
• Tire Rotation / Balancing
• Tune-up / Spark Plug Replacement
• Wiper Blade Replacement